CONTINUITY TEST - TM-9-2320-366-20-20525

TM 9-2320-366-20-2

CONTINUITY TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter on pin

A of remote control cable connector.

(3)

Connect negative (-) probe of multimeter on

terminal board lower position 9 and note

reading on multimeter.

(4)

If continuity is not present, replace remote

control cable (para 7-115 or 7-118).

(5)

If continuity is present, notify DS Maintenance.

(6)

Close cover on junction box.

(7)

Tighten four screws on junction box cover.

(8)

Stow crane (TM 9-2320-366-10-1).

2-1401