CONTINUITY TEST - TM-9-2320-366-20-20429

TM 9-2320-366-20-2

CONTINUITY TEST

(1)

Remove cover from crane remote control box

connector.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter on pin

J of crane remote control box connector.

(4)

Connect negative (-) probe of multimeter on pin

H of crane remote control box connector and

note reading on multimeter.

(5)

If continuity is not present, replace ON/OFF

switch (para 7-32).

(6)

If continuity is present, repair crane remote

control box internal wiring harness (para 7-32).

(7)

Install cover on crane remote control box

connector.

2-1305