CONTINUITY TEST - TM-9-2320-366-20-20305

TM 9-2320-366-20-2

CONTINUITY TEST

(1)

Disconnect external remote control cable from

remote control box.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter on pin

F of connector on remote control box.

(4)

Connect negative (-) probe of multimeter on pin

H of connector on remote control box.

NOTE

Step (5) requires the aid of

an assistant.

(5) Position HOIST UP/DOWN controller to UP and

note reading on multimeter.

(6) If continuity is not present, go to step 4 of this

fault.

(7) If continuity is present, go to step 5 of this fault.

2-1181