|
|
TM 9-2320-366-20-2
TM
CONTINUITY TEST
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
connector P80B-1.
(3)
Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(4)
If continuity is not present, go to step 5 of
this fault.
(5)
If continuity is present, replace air dryer
(para 23-11).
(6)
Connect connector P80B to air dryer.
2-1151
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |