CONTINUITY TEST - TM-9-2320-366-20-20191

TM 9-2320-366-20-2

CONTINUITY TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter to

connector J7-3.

(3)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(4)

If continuity is not present, repair wire 3099

(para 2-45) or replace WTEC II dashboard

cable assembly (para 7-10).

(5)

If continuity is present, replace WTEC II

TEPSS dimmer module (para 7-13).

(6)

Connect connector J7 to WTEC II TEPSS

dimmer module.

(7)

Install PDP on dashboard with three screws.

(8)

Install three washers and screws in PDP.

(9)

Install kick panel (para 16-3).

2-1067