CONTINUITY TEST - TM-9-2320-366-20-20151

TM 9-2320-366-20-2

CONTINUITY TEST

(1)

Remove WTEC III relay K37 from PDP.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

connector J913-15.

(4)

Connect negative (-) probe of multimeter to

PDP, terminal 30, where WTEC III relay K37

was removed, and note reading on multimeter.

(5)

If continuity is not present, repair wire 1904

(para 2-45) or replace WTEC III dashboard cable

assembly (para 7-11).

(6)

Install WTEC III relay K37 in PDP.

2-1037