 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-2
TM
CONTINUITY TEST
(1)
Remove kick panel (para 16-3).
(2)
Disconnect connector P210 from connector J210.
(3)
Set multimeter to ohms.
(4)
Connect positive (+) probe of multimeter to
connector P903-7.
(5)
Connect negative (-) probe of multimeter to
connector P210-8 and note reading on
multimeter.
(6)
If continuity is not present, repair wire 2008
(para 2-45) or replace auxiliary panel cable
assembly (para 7-58).
(7)
Connect connector P903 to WINCH IN/OUT
switch.
(8)
Position auxiliary panel on auxiliary panel
housing with six screws.
(9)
Tighten six screws to 24 lb-in. (3 Nm).
2-1005
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals