VOLTAGE TEST - TM-9-2320-366-20-20043

TM 9-2320-366-20-2

WARNING

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle. Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

VOLTAGE TEST

(1) Position master power switch to on

(TM 9-2320-366-10-1).

(2) Set multimeter to volts DC.

(3) Connect positive (+) probe of multimeter to

connector P110 socket H.

(4) Connect negative (-) probe of multimeter to

known good ground and note reading on

multimeter.

(5) If 24 VDC is not present, go to step 25 of

this fault.

(6) Position master power switch to off

(TM 9-2320-366-10-1).

Change 2

2-949