CONTINUITY TEST - TM-9-2320-366-20-11499

TM 9-2320-366-20-1

CONTINUITY TEST

(1)

Remove kick panel (para 16-3).

(2)

Disconnect connector P99 from connector J99.

(3)

Set multimeter to ohms.

(4)

Connect positive (+) probe of multimeter to

connector P99-2.

(5)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(6)

If continuity is not present, repair wire 1804

(para 2-45) or replace WTEC II dashboard cable

assembly (para 7-10) or WTEC III dashboard

cable assembly (para 7-11).

(7)

If continuity is present, repair wire 1804

(para 2-45) or replace chemical alarm kit

cable assembly (para 7-59).

(8)

Connect connector P99 to connector J99.

(9)

Install kick panel (para 16-3).

2-935