 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-1
TM
WARNING
Remove rings, bracelets, watches,
necklaces, and any other jewelry
before working around vehicle.
Jewelry can catch on equipment
and cause injury or short across
electrical circuit and cause severe
burns or electrical shock.
VOLTAGE TEST
NOTE
Remove plastic cable ties as required.
(1)
Disconnect connector P52R from connector
J52.
(2)
Set multimeter to volts dc.
(3)
Connect positive (+) probe of multimeter to
connector P52R-1.
(4)
Connect negative (-) probe of multimeter to
ground.
(5)
Position main light switch to SER DRIVE
(TM 9-2320-366-10-1) and note reading on
multimeter.
(6)
If 12 vdc is not present, repair wire 21
(para 2-45) or replace rear lights cable
assembly (para 7-84 or 7-104).
(7)
If 12 vdc is present, replace rear intervehicular
12 vdc (7 pin) cable (para 7-128).
(8)
Position main light switch to OFF
(TM 9-2320-366-10-1).
NOTE
Install plastic cable ties as required.
(9)
Connect connector P52R to connector J52.
2-861
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals