VOLTAGE TEST - TM-9-2320-366-20-11401

TM 9-2320-366-20-1

WARNING

Remove rings, bracelets, watches,

necklaces, and any other jewelry

before working around vehicle.

Jewelry can catch on equipment

and cause injury or short across

electrical circuit and cause severe

burns or electrical shock.

VOLTAGE TEST

(1)

Raise cover on connector J95 intervehicular 12

vdc connector.

(2)

Set multimeter to volts dc.

(3)

Connect positive (+) probe of multimeter to

connector J95-2.

(4)

Connect negative (-) probe of multimeter to

ground.

(5)

Position main light switch to SER DRIVE

(TM 9-2320-366-10-1) and note reading on

multimeter.

(6)

If 12 vdc is not present, go to step 2 of this

fault.

(7)

If 12 vdc is present, perform Electrical System

Troubleshooting (e48. Side and/or Rear Marker

Lights Do Not Illuminate) if towed vehicle is

FMTV. If towed vehicle is not an FMTV, refer

to towed vehicle TM for troubleshooting

procedures.

(8)

Position main light switch to OFF

(TM 9-2320-366-10-1).

2-837