CONTINUITY TEST - TM-9-2320-366-20-11293

TM 9-2320-366-20-1

CONTINUITY TEST

(1)

Remove screw, lockwasher, and terminal

lug TL79 (LH) or TL70 (RH) from composite

front light light assembly. Discard lockwasher.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

terminal lug TL79 (LH) or TL90 (RH).

(4)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(5)

If continuity is not present, repair wire 3091

(para 2-45) or replace front lights cable

assembly (para 7-82).

(6)

If continuity is present, replace composite front

light assembly (para 7-40).

(7)

Install terminal lug TL79 (LH) or TL90 (RH),

lockwasher, and screw on composite front

light assembly.

2-739