CONTINUITY TEST - TM-9-2320-366-20-11289

TM 9-2320-366-20-1

CONTINUITY TEST

(1)

Loosen five screws on cover.

(2)

Remove cover and preformed packing from

housing. Discard preformed packing.

(3)

Remove lamp from socket.

(4)

Set multimeter to ohms.

(5)

Check continuity through lamp and note

reading on multimeter.

(6)

If continuity is not present, replace

lamp (para 7-40).

(7)

Install turn signal lamp in socket.

(8)

Install preformed packing and cover on housing

with five screws.

2-735