VOLTAGE TEST - TM-9-2320-366-20-11179

TM 9-2320-366-20-1

WARNING

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle. Jewelry can catch on equipment and

cause injury or short across electrical circuit

and cause severe burns or electrical shock.

VOLTAGE TEST

(1)

Disconnect connector P24 (LH composite front

light assembly) or connector P8 (RH composite

front assembly) from composite front assembly

connector.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

connector P24 or connector P8.

(4)

Connect negative (-) probe of multimeter to

ground.

(5)

Position main light switch to BO MARKER

(TM 9-2320-366-10-1) and note reading on

multimeter.

(6)

If 12 vdc is not present, repair wire 20 or 20A

(para 2-45) or replace front lights cable

assembly (para 7-82).

(7)

Position main light switch to OFF

(TM 9-2320-366-10-1).

(8)

Connect connector P24 or connector P8

to composite front light assembly connector.

2-625