VOLTAGE TEST - TM-9-2320-366-20-11151

TM 9-2320-366-20-1

WARNING

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle. Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

VOLTAGE TEST

(1) Set multimeter to volts DC.

(2) Connect positive (+) probe of multimeter

to relay K20 terminal 86 on PDP.

(3) Connect negative (-) probe of multimeter to

ground and note reading on

multimeter.

(4) If 12 VDC is not present, go to step 24 of

this fault.

Change 1

2-612.25