VOLTAGE TEST - TM-9-2320-366-20-11149

TM 9-2320-366-20-1

WARNING

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle. Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

VOLTAGE TEST

(1) Set multimeter to volts DC.

(2) Connect positive (+) probe of multimeter

to relay K20 terminal 30 on PDP.

(3) Connect negative (-) probe of multimeter to

ground.

(4) Position main light switch to SER DRIVE

(TM 9-2320-366-10-1) and note reading on

multimeter.

(5) If 12 VDC is not present, repair wire 1501

from terminal X2 on PDP to relay K20

terminal 30 on PDP (para 2-45) or replace

WTEC II dashboard cable assembly

(para 7-10) or WTEC III dashboard cable

assembly (para 7-11).

(6) Position main light switch to OFF

(TM 9-2320-366-10-1).

Change 1

2-612.23