|
|
TM 9-2320-366-20-1
CONTINUITY TEST
(1) Remove two screws and lens cover from
RH side marker light base.
(2) Set multimeter to ohms.
(3) Remove RH side marker light lamp from
socket.
(4) Check continuity through RH side marker
light lamp and note reading on multimeter.
(5) If continuity is not present, replace RH side
marker light lamp (para 7-38) and go to
step 9 of this fault if required.
(6) Install RH side marker light lamp in socket.
(7) Install lens cover on RH side marker light
base with two screws.
Change 1
2-604.145
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |