 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-1
If vehicle is not M1089, replace middle rear
marker light (para 7-38) and go to step 12 of
this fault if required.
CONTINUITY TEST
(1) Remove nut, lockwasher terminal lug
TL31, and lockwasher from middle rear
masrker light screw. Discard lockwashers.
(2) Set multimeter to ohms.
(3) Connect positive (+) probe of multimeter
to terminal lug TL31.
(4) Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(5) If continuity is not present, repair wire
3094 from terminal lug TL31 to terminal
lug TL30 (para 2-45) and go to step 12 of
this fault if required or replace M1089 rear
lights cable assembly (para 7-104) and go
to step 1 of this fault.
(6) If continuity is present, replace middle rear
marker light (para 7-38) and go to step 12
of this fault if required.
(7) Install lockwasher, terminal lug TL31,
lockwasher, and nut on middle rear
marker light screw.
Change 1
2-604.131
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals