 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-1
If vehicle is not M1089, replace RH rear marker
light (para 7-38).
CONTINUITY TEST
(1) Remove nut, lockwasher, terminal lug TL32,
and lockwasher from RH rear marker light
screw. Discard lockwashers.
(2) Remove nut, lockwasher, terminal lug TL31,
and lockwasher from middle rear marker light
screw. Discard lockwashers.
(3) Set multimeter to ohms.
(4) Connect positive (+) probe of multimeter
to terminal lug TL32.
(5) Connect negative (-) probe of multimeter to
terminal lug TL31 and note reading on
multimeter.
(6) If continuity is not present, repair wire
3094 from terminal lug TL32 to terminal
lug TL31 (para 2-45) or replace M1089
rear lights cable assembly (para 7-104).
(7) If continuity is present, replace RH rear
marker light (para 7-38).
(8) Install lockwasher, terminal lug TL31,
lockwasher, and nut on middle rear
marker light screw.
(9) Install lockwasher, terminal lug TL32,
lockwasher, and nut on RH rear marker
light screw.
(10) Connect RH rear marker light connector
to connector P58.
Change 1
2-604.85
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals