|
|
TM 9-2320-366-20-1
CONTINUITY TEST
(1) Remove two screws and lens cover from
LH door marker light base.
(2) Remove LH door marker light lamp from
socket.
(3) Set multimeter to ohms.
(4) Check continuity through LH door marker
light lamp and note reading on multimeter.
(5) If continuity is not present, replace LH
door marker light lamp (para 7-38).
(1) Position main light switch to SER DRIVE
(TM 9-2320-366-10-1).
(2) If LH cab marker light lamp does not
illuminate, go to step 8 of this fault.
(3) Position main light switch to OFF
(TM 9-2320-366-10-1).
Change 1
2-565
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |