 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-1
TM
CONTINUITY TEST
(1)
Remove kick panel (para 16-3).
(2)
Disconnect connector clamp from connector
P115.
(3)
Disconnect connector P115 from WTEC III
transmission ECU.
(4)
Set multimeter to ohms.
(5)
Connect positive (+) probe of multimeter to
connector PX7-20.
(6)
Connect negative (-) probe of multimeter to
connector P115-19 and note reading on
multimeter.
(7)
If continuity is not present, repair wire 105
(para 2-45) or replace WTEC III dashboard
cable assembly (para 7-11).
(8)
If continuity is present, replace WTEC III
transmission ECU (para 8-7).
(9)
Connect connector P115 to WTEC III
transmission ECU.
(10)
Connect connector clamp to connector P115.
(11)
Install kick panel (para 16-3).
(12)
Connect lighted indicator display to connector
PX7.
(13)
Position lighted indicator display in instrument
panel assembly with four screws.
(14)
Tighten four screws to 6-10 lb-in. (1 Nm).
(15)
Connect batteries (para 7-57).
2-509
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals