CONTINUITY TEST - TM-9-2320-366-20-10339

TM 9-2320-366-20-1

CONTINUITY TEST

(1)

Disconnect batteries (para 7-57).

(2)

Remove relay K11 from PDP.

(3)

Set multimeter to ohms.

(4)

Connect positive (+) probe of multimeter to

relay K24 socket 86 on PDP.

(5) Connect negative (-) probe of multimeter to

relay K11 socket 30 and note reading on

multimeter.

(6) If continuity is not present, repair wire 1658

from relay K24 socket 86 on PDP to relay

K30 socket 30 on PDP (para 2-45) or

replace WTEC II dashboard cable assembly

(para 7-10) or WTEC III dashboard cable

assembly (para 7-11).

(7) Install relay K24 in PDP.

Change 1

2-209