Installation. - TM-9-2320-279-20-11062

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-96. CRANE OUTRIGGER EXTENDED LIGHT ASSEMBLY REMOVAL/iNSTALLATION (M983,

M984, M985E1) (CONT).

(2) Pull out socket (3) from housing (4).

(3) Remove lamp (5) from socket (3).

NOTE

Tag and mark wires before disconnecting

or removing.

(4) Cut two wires at electrical butt

connectors (6) and remove socket (3).

(5) Remove light shield (7), lens (8), and

nut (9) from heater compartment

cover (2). Remove lens from light shield.

Remove force ring (10) from lens.

(6) Remove housing (4) and lockwasher (11).

b. Installation.

(1) Install lockwasher (1) on housing (2).

Install housing in heater compartment

cover (3) and secure with nut (4).

(2) Install force ring (5) in lens (6). Install

lens in light shield (7). Install light shield

on heater compartment cover (3).

NOTE

Two wires are interchangeable when

connecting wires to socket wires.

(3) Install electrical butt connectors (8) on

two wires (9) and crimp electrical butt

connectors securely.

(4) Install lamp (10) in socket (11).

(5) Install socket (11) in housing (2).

7-358