Installation. - TM-9-2320-279-20-11004

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-86.1.

TLI TANK LEVEL INDICATOR GAGE AND BRACKET REMOVAL/

INSTALLATION (M978) (CONT).

Installation.

NOTE

There are two models of vehicle

when performing this procedure.

Model B incorporates a blue ground

wire to the gage. Model A does not

incorporate this blue ground wire.

Perform step (1) if working on a

Model A vehicle.

Perform step (2) if working on a

Model B vehicle.

(1)

Position TLI TANK LEVEL

INDICATOR gage (1) in cover (2)

and install three wires (3, 4, and 5)

with four washers (6) and five nuts (7).

(2)

Position TLI TANK LEVEL

INDICATOR gage (1) in cover (2) and

install four wires (3, 4, 5, and 8) with

washers (6) and five nuts (7).

(3)

Install lamp (9) in clip socket (10).

(4)

Install clip socket (10) in TLI

TANK LEVEL INDICATOR

gage (1).

(5)

Install gasket (11) and bracket (12) on TLI

TANK LEVEL INDICATOR gage (1) with

two nuts (13).

NOTE

Perform step (6) if working on a

Model A vehicle.

Perform step (7) if working on a

Model B vehicle.

(6)

Install three wires (3, 4, and 14)

through indicator box (15).

(7)

Install four wires (3, 4, 8, and 14)

through indicator box (15).

(8)

Install TLI TANK LEVEL

INDICATOR gage (1), cover (2),

and gasket (11) with three

screws (16).

7-310.4

Change 5