 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
a.
Removal.
NOTE
Tag and mark wires before removing.
(1)
Remove two screws (1) and wires (2)
from oil pressure switch (3).
(2)
Remove oil pressure switch (3) from
manifold (4).
b.
Installation.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(1)
Coat threads of oil pressure switch (3)
with pipe thread sealing compound, and
install oil pressure switch in manifold
(4).
NOTE
Apply electrical sealant to exposed wire
connectors after installing connectors.
(2)
Connect two wires (2) to oil pressure
switch (3) with two screws (1).
c.
Follow-on Maintenance.
(1)
Connect batteries (para 7-91).
(2)
Check operation of hour meter
(TM 9-2320-279-10).
(3)
Install engine side panel (TM 9-2320-279-10).
(4)
Close engine cover (TM 9-2320-279-10).
END OF TASK
Change 5
7-297
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals