Installation. - TM-9-2320-279-20-10965

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

Installation.

(1)

Install two bumpers (1) on tube (2) with

screws (3).

(2)

Install four bumpers (4) on two

brackets (5) with four screws (6),

lockwashers (7), and nuts (8).

(3)

Install two brackets (5) on tube (2) with

screws (9), washers (10), and

wingnuts (11).

(4)

Install two composite lights (12) and

ground wire pigtails (12.1) (Model B

only) on tube (2) with three screws (13)

NOTE

All three clearance lights are installed the same way.

(5)

Install gasket (15) and lampholder (16) on clearance light

bracket (17) with two screws (18).

(6)

Install bulb (19) and lens (20) in lampholder (16) with two

screws (21).

(7)

Install eight pins (22) on wires (23).

(8)

Install eight wires (23) in connector (24).

Change 5

7-275