Installation-continued - TM-9-2320-279-20-10827

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont]

(3) Install terminal board (6) in control

junction box (5) with two screws (7),

lockwashers (8), and nuts (9).

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. To avoid injury or death,

keep away from open fire and use in

well-ventilated area. If adhesive, solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap and

water.

(4) Apply silicone adhesive-sealant over screw heads (7).

(5) Install seven wires (10) on

terminal board (6) with five

screws (11).

(6) Install connector (12) on

relay assembly (13).

(7) Install screw (14), relay

assembly (13),

lockwasher (15), nut (16),

two wires (17), and nut (18)

in control junction box (5).

(8) Apply silicone

adhesive-sealant over screw

head (14).

(9) Position control junction box (5) on

bracket (19) and install two screws (20),

lockwashers (21), and nuts (22).

(10) Position wire (23) in control junction

box (5) and install nut (24) on elbow (1).

7-163