Installation. - TM-9-2320-279-20-10762

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont).

7-33. IGNITION RELAY REMOVAL/INSTALLATION (CONT).

NOTE

Tag and mark wires before disconnecting.

(2) Remove two screws (3), ground wire (4), and ground wire (5).

(3) Remove four screws (6). Disconnect three wires (7, 8, and 9) and ground wire (5).

(4) Remove ignition relay (10).

b . Installation.

(1) Connect three wires (1, 2, and 3) and

wire (4) with four screws (5). Tighten

screws.

(2) Install ignition relay (6), ground

wire (7), and ground wire (4) with two

screws (8).

7-102