 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
a.
Removal.
(1)
Pull light socket (1) from
transmission oil temperature
gage (2).
NOTE
Tag and mark wires before
disconnecting.
Some trucks have two wires. Some
trucks have three.
(2)
Disconnect three wires (3) from
terminals (4).
(3)
Remove two nuts (5),
lockwashers (6), and bracket (7).
(4)
Pull transmission oil
temperature gage (2) from
instrument panel (8).
(5)
Remove three nuts (9),
lockwashers (10), and three
terminals (4) from transmission
oil temperature gage (2).
b.
Installation.
(1)
Install three terminals (4), three
lockwashers (10), and nuts (9)
on transmission oil temperature
gage (2).
(2)
Install transmission oil
temperature gage (2) and
bracket (7) on instrument
panel (8).
(3)
Install two nuts (5) and
lockwashers (6) to secure
transmission oil temperature
gage (2) and bracket (7) on
instrument panel (8).
(4)
Connect three wires (3) to terminals (4).
(5)
Push light socket (1) in transmission oil temperature gage (2).
c.
Follow-on Maintenance.
(1)
Install instrument panel (para 7-19).
(2)
Start engine and check operation of transmission oil temperature gage (TM 9-2320-279-10).
(3)
Shut off engine (TM 9-2320-279-10).
END OF TASK
Change 4
7-85
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals