Installation. - TM-9-2320-279-20-10720

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-14.

ENGINE CIRCUIT BREAKER REMOVAL/INSTALLATION (CONT).

Installation.

NOTE

Steps (1) through (3) are for M978

and M983 only.

Some vehicles have screws,

lockwashers, and nuts. Others have

screws and nuts.

(1)

Install circuit breaker (1) with two

screws (2) and nuts (4).

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. To avoid injury or death,

keep away from open fire and use in

well-ventilated area. If adhesive, solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap and

water.

NOTE

Apply electrical sealant to exposed wire

connectors after installing connectors.

(2)

Connect wire (5) with screw (6) and

lockwasher (7).

(3)

Connect wire (8) to bus bar (9) with

screw (10) and lockwasher (11).

7-66

Change 5