Installation. - TM-9-2320-279-20-10601

TM 9-2320-279-20-1

Cooling System Maintenance Instructions (Cont)

b. Installation.

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing. To avoid injury or death, keep away

from open fire and use in well-ventilated area. If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

(1) Coat pipe threads of fittings (1 and 2) with pipe thread sealing compound and install in

radiator (3).

(2) Install four nuts (4 and 5) all the way on rods (6) with four washers (7), two spacers (8), and

mounts (9). Install rods in radiator brackets (10) with two washers (11) and nuts (12). Do not

tighten nuts.

CAUTION

Do not grip studs closer than 1-1/2 in. (38 mm) from each end of stud. Studs will

be damaged.

(3) Install two studs (13) in radiator (3).

(4) Install two mounts (14) on studs (13).

6-7