Installation. - TM-9-2320-279-20-10586

9-2320-279-20-1

Fuel System Maintenance Instructions (Cent)

14-16. THROTTLE

AIR SOLENOID CHECK VALVE

Remove elbow (4), tee (5), and fitting (8) from check valve (6)

b. Installation.

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off

harmful vapors, and are harmful to skin and clothing. To avoid injury or

death, keep away from open fire and use in well-ventilated area. If

adhesive, solvent, or sealing compound gets on skin or clothing, wash

immediately with soap and water.

Coat threads of elbow (1) and fitting (2) with pipe thread sealing

compound and install in check valve (3).

Coat threads of tee (4) with pipe thread sealing compound and install in

fitting (2).

(3) Coat threads of fitting (5) with pipe thread sealing compound

and install check valve (3) on fitting.

Connect three air lines (6, 7, and 8) to tee (4) and elbow (l).

c. Follow-on Maintenance.

(1) Start engine and build air pressure (TM 9-2320-279-10).

(2) Check for air leaks.

(3) Shut off engine (TM 9-2320-279-10).

Install engine left side panel (TM 9-2320-279-10).

END OF TASK

4-56