|
|
![]() TM 9-2320-279-20-1
Preparation for Storage or Shipment (Cont)
2-33. STORAGE (CONT).
(f) If additional storage time is required, repeat step (e) at yearly intervals.
(5) Self-recovery winch extended storage.
None required.
(6) Axle extended storage.
CAUTION
To avoid overfilling, drain an amount of oil equal to amount being added before installing
additive or damage to equipment may result.
(a) Drain amount of oil from axle that is equal to quantity of additive being added.
(b) Add VCI-326 vapor corrosion inhibitor (MIL-P-46002) or equivalent to:
No. 1 Axle - 1.8 pt (0.8 L) All Models
No. 2 Axle - 2.2 pt (1 L) All Models
No. 3 Axle - 2.1 pt (1 L) M977, M978, M985, M985E1
No. 3 Axle - 2.4 pt (1.2 L) M983
No. 3 Axle - 2.2 pt (1 L) M984, M984A1
No. 4 Axle - 1.7 pt (0.8 L) M977, M978, M985, M985E1
No. 4 Axle - 1.6 pt (0.73 L) M983
No. 4 Axle - 1.8 pt (0.85 L) M984
No. 4 Axle - 2.2 pt (1.1 L) M984A1
(c) Drive vehicle approximately 1 mile (1.6 km) to mix additive.
(d) If additional storage time is required, repeat steps (a) and (b) at yearly intervals,
(7)
Transfer case extended storage.
CAUTION
To avoid overfilling, drain an amount of oil equal to amount being added before installing
additive or damage to equipment may result.
(a) Drain amount of oil from transfer case that is equal to quantity of additive being
added.
(b) Add 0.5 pt (0.25L) VCI-326 vapor corrosion inhibitor (MIL-P-46002) or
equivalent to transfer case.
(c) If vehicle can be driven, drive vehicle approximately 1 mile (1.61 km) to mix
additives. If vehicle cannot be driven, shift transfer case to neutral; start engine
with parking brakes applied and shift transmission manually through all gear
selections.
WARNING
Ensure transfer case is cool before proceeding. Failure to comply may result in injury to
personnel.
(d) When transfer case is cool enough to touch by hand, seal breather with moisture proof tape.
petrolatum (MIL-C-11796, Grade 2) or equivalent.
(f) If additional storage time is required, repeat step (b) at yearly intervals.
(8) Transmission extended storage.
(a) Drain oil (LO 9-2320-279-12).
(b) Add 2 quarts (1.9L) of VCI-329 vapor corrosion inhibitor (MIL-P-46002) or
equivalent and then fill transmission to operating level with transmission fluid.
Add one teaspoon of Biobor JF (MIL-S-53021) or equivalent as a fungus inhibitor
to transmission oil.
2-344
Change 3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |