Inspection. - TM-9-2320-211-34-2-30325

TM 9-2320-211-34-2-3

WARNING

D r y cleaning solvent is flammable. Do not use

n e a r an open flame. Keep a fire extinguisher

n e a r b y when solvent is used. Use only in well

v e n t i l a t e d places. Failure to do this may result

i n injury to personnel and damage to equipment.

C l e a n all parts in solvent. Make sure grease and oil passages

d. Cleaning.

are open.

Inspection.

FRAME 1

C h e c k that tube assembly (1) is not cracked and does not have broken welds.

C h e c k that inner bore of tube assembly is not scratched or scored, and has

no badly worn surfaces.

C h e c k that oil passages in tube assembly (1) are not clogged or burred.

Check that screw threads are not burred, stripped or crossed.

C h e c k that cylinder head (2) and gland (3) are not cracked or broken,

a n d that bores are not burred.

C h e c k that piston (4) and three piston rings (5) are not nicked, scratched

o r cracked, and that they do not have worn surfaces.

C h e c k that piston rod (6) is not bent, nicked or scratched, and that it

does not have burred, stripped or crossed threads.

C h e c k that pin (7) is not chipped or scored, and that it has no flat spots.

END OF TASK

17-309