Inspection and Repair. - TM-9-2320-211-34-2-30051

TM 9-2320-211-34-2-3

WARNING

D r y cleaning solvent is flammable. Do not use

near an open flame. K e e p a fire extinguisher

n e a r b y when solvent is used. Use only in well-

v e n t i l a t e d p l a c e s . Failure to do this may result

i n injury to personnel and damage to equipment.

C l e a n i n g . Wash all metal parts with dry cleaning solvent. Wipe with clean

dry rags.

I n s p e c t i o n and Repair.

( 1 ) Check that all bearings are not damaged. Refer to Part 1, para 7-7. If

b e a r i n g s are damaged, get new ones.

( 2 ) Check that sheave shafts have no wear, cracks or burrs. Polish burrs

w i t h crocus cloth. I f shafts are cracked, get new ones.

(3) Check that sheaves have no cracks or bends. If sheaves are cracked,

b e n t or worn, get new ones.

( 4 ) Check that tension frame has no cracks or bends. Repair cracks by

w e l d i n g . R e f e r to TM 9-237.

(5) Check that operating lever has no cracks or bends. Repair cracks by

w e l d i n g . R e f e r to TM 9-237.

( 6 ) Check that washers have no wear or scoring marks. If washers are worn

or scored, get new ones.

17-35