Steering gear housing with bushing and seal assembly.

TM 9-2320-211-34-2-2

(4) Steering gear housing with bushing and seal assembly.

FRAME

P u t bushing remover and replacer (1) on inner bushing (2). Press until

o u t e r bushing (3) is out of housing (4) and inner bushing sticks out 1/2 inch.

P r e s s in new inner bushing (2) flush with housing (4). Using old inner

b u s h i n g as a pilot, ream new inner bushing 1.7485 to 1.750 inches.

P r e s s in new outer bushing (3) flush with

T a k e out old inner bushing (2).

b o t t o m of seal recess.

R e a m new outer bushing (3) using new inner bushing (2) as a pilot. Ream

b u s h i n g 1.7485 to 1.750 inches.

B u r n i s h inner and outer bushings (2 and 3).

GO TO FRAME 2

13-46