FRAME 12 - TM-9-2320-211-34-2-10605

TM 9-2320-211-34-2-1

FRAME 12

Take out eight screws (1) with washers (2).

T a p on rear end of drive shaft assembly (3) to loosen it. Slide out drive

s h a f t assembly with shims (4).

T a k e off shims (4 .

NOTE

Use shims taken from carrier gasket and shim kit.

If dial indicator reading made in frame 11 was more than marking on bevel

p i n i o n gear (5), add a shim or use thicker shim in its place. Shim used

s h o u l d be same size as difference between reading and marking.

I f dial indicator reading was less than marking on bevel pinion gear (5), take

away a shim or use thinner shim in its place.

GO BACK TO FRAME 10

9-53