|
|
TM 9-2320-211-34-2-1
1.
C h e c k that mounting flanges of shifter housing (1) are not nicked, burred
or scratched.
Smooth with crocus cloth or honing stone. If more repair
is needed, get a new housing.
2.
Check that tapped holes in housing (1) are not stripped or crossthreaded.
Chase damaged threads with correct size tap.
3.
Check that springs (2 and 3) are not broken or twisted. If springs are
damaged, get new ones.
4.
Check that free length of spring (2) is 2 1/32 inches. Check that spring
measures 1 5/8 inches under pressure of 56 to 64 pounds.
If spring is
n o t within given limits, get a new one.
5.
C h e c k that three shafts (4) are not cracked or bent. If shafts are damaged
get new ones.
GO TO FRAME 16
7-61
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |