|
|
TM 9-2320-211-20-3-2
(3) Bow assembly.
FRAME 1
Push bow top (1) into bow corner (2) as shown and aline holes. Using screw-
1.
driver, screw in and tighten two screws (3).
2. Push bow stake (4) into bow corner (2) as shown and aline holes. Using
screwdriver, screw in and tighten two screws (5).
3. Put strap (6) against bow corner (2). Aline holes and hold in place. Using
screwdriver, screw in and tighten screws (7).
4. Do steps 1 through 3 again for other side of bow top (1).
END OF TASK
21-103
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |