FRAME 4 - TM-9-2320-211-20-3-20698

TM 9-2320-211-20-3-2

FRAME 4

WARNING

Do not let tool touch battery and truck. This will cause

a direct short, arcing, tool will heat to red hot, and

battery may explode. This can cause serious injury to

personnel and damage to equipment.

Using battery carrier, place two batteries (1) into battery box (2) with

positive (+) terminals toward front of truck.

Place four J-bolts (3) through holes in hold down frame (4).

CAUTION

Do not tighten nuts on J-bolts too much or battery case

may crack.

3. Using 5/8-inch wrench, screw on and tighten four nuts (5) with washers

(6) and lockwashers (7).

GO TO FRAME 5

21-56