|
|
TM 9-2320-211-20-3-2
FRAME 2
1.
Put two upper straps (1) in place on top of oil tank assembly (2).
Put two lower straps (3) in place on oil tank assembly (2) and put two
2.
screws (4) through bottom ends of lower straps.
3. Using 1/2-inch socket wrench and 1/2-inch open end wrench, screw on
and tighten two nuts (5).
4. Put two screws (6) through upper straps (1) and lower straps (3). Using
9/16-inch socket wrench and 9/16-inch open end wrench, screw on and
tighten two nuts (7).
GO TO FRAME 3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |