|
|
TM 9-2320-211-20-3-2
1.
Put on control valve bank assembly cover assembly (1) as shown.
Using flat-tip screwdriver, screw in and tighten five screws (2).
2.
Throw away rags in proper container.
3.
Take out container and put hydraulic fluid into approved disposal area.
4.
NOTE
Follow-on Maintenance Action Required:
1. Reconnect battery ground cable. Refer to Part 1,
para 7-44.
2. Service hydraulic hoist system. Refer to
END OF TASK LO 9-2320-211-12.
18-151
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |