FRAME 2 - TM-9-2320-211-20-3-20443

TM 9-2320-211-20-3-1

FRAME 2

NOTE

Be sure to tag valve bank hoses before taking them off

so that they will be put back in same place. Place con

tainer under hoses to catch hydraulic fluid drainage.

Using 1 1/2-inch wrench, unscrew and take off seven hose fittings (1).

Let hoses (2) hang.

Using 7/8-inch wrench, unscrew and take off hose (3). Let hose hang.

Using 2-inch wrench, unscrew nut (4). Slide nut back on tube (5).

Using 2-inch wrench, unscrew and take off adapter (6).

Using 1 1/2-inch wrench, unscrew fitting (7). Slide fitting back on tube

(8).

Cap all open hoses (2 and 3), tubes (5 and 8), and fittings (1 and 7).

Using clean rags, wipe up all hydraulic fluid that may have leaked from

hoses (2 and 3).

TO FRAME 3

18-147