|
|
TM 9-2320-211-20-3-2
(2) Replacement.
FRAME 1
Using pipe wrench, screw in and tighten crossover tube tee fitting (1) into
1.
crossover tube (2).
2. Using 1 11/16-inch wrench, screw in and tighten adapter nut (3) in tee
fitting (1).
3. Using 2-inch wrench, screw in and tighten coupling nut (4) on tube (5) onto
adapter nut (3).
4. Using 1 11/16-inch wrench, screw in and tighten fitting (6) on hose (7) into
elbow (8).
5. Replace gondola guard. Refer to para 18-33.
NOTE
Follow-on Maintenance Action Required:
Fill hydraulic reservoir. Refer to LO 9-2320-211-12.
END OF TASK
18-127
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |