FRAME 4 - TM-9-2320-211-20-3-20354

TM 9-2320-211-20-3-2

FRAME 4

WARNING

Always wear leather gloves when handling winch cable.

Never allow cable to run through hands. Rusty or

broken wires can cause serious injury to personnel.

Using length of wood as lever, pry up roller (1) to keep shaft

Soldier A 1.

(2) alined with holes in brackets (3).

Using drift pin punch and hammer on right side of roller (1),

Soldier B 2.

drive out shaft (2) as far as it will go. Pull shaft the rest

of the way out.

Using length of wood, pry up roller (1) enough for clevis (4)

Soldier A 3.

to pass under roller.

Push clevis (4) and end of winch cable (5) under roller (1)

Soldier B 4.

into winch housing (6).

Soldier A 5.

Using length of wood, lower roller (1) into place and aline

shaft (2) with holes in roller and brackets (3).

Using mallet, lightly drive shaft (2) into brackets (3) and

Soldier B 6.

roller (1).

Take out length of wood.

Soldier A 7.

GO TO FRAME 5

18-58