|
|
TM 9-2320-211-20-3-2
FRAME 5
WARNING
Dry cleaning solvent is flammable. Do not use near an open
flame. Keep a fire extinguisher nearby when solvent is used.
Use only in well-ventilated places. Failure to do this may
result in injury to personnel and damage to equipment.
1. Using rag, wipe all grease from spring seat (1), two bearings (2), and two cups (3).
Clean with solvent and let dry thoroughly. Do not use compressed air.
2. Check that bearings (2) and cups (3) have no wear or defects.
3. If bearings (2) or cups (3) are damaged, using drift punch and hammer, drive cups out
of spring seat (1). Throw away cups and bearings.
END OF TASK
16-23
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |