FRAME 4 - TM-9-2320-211-20-3-20229

TM 9-2320-211-20-3-2

FRAME 4

Place four washers (1) on two U-bolts (2).

Using 1 1/2-inch wrench, screw on four nuts (3).

Using torque wrench, tighten nuts (3) to 350 to 450 pound-feet.

Place washers (4) on two screws (5).

Using 1 13/16-inch wrench, screw in and tighten screws (5) into spring

seat (6).

NOTE

Follow-on Maintenance Action Required:

1. Put back rear wheels. Refer to TM 9-2320-211-10.

2. Take out all jacks and blocks. Refer to Part 1, para 10-3.

END OF TASK

16-17