FRAME 2 - TM-9-2320-211-20-3-20049

TM 9-2320-211-20-3-2

FRAME

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when sol-

vent is used. Use only in well-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

1. Clean hub (1) with solvent and let it dry.

2. Check that hub (1) is not cracked. If hub is cracked, throw it away and get

a new one.

3. Check that inner and outer wheel bearing cups (2) are tight inside hub (1).

If cups are loose, remove inner and outer wheel bearing cups. Refer to para

13-12. Throw away hub and get a new one.

4. Check that backing plate (3) , and deflector (4) are not cracked or warped. If

parts are damaged, throw them away and get new ones.

5. Check bearing cone (5) , seal (6) and wiper (7). Refer to rear wheel bearing

cones and seals inspection and lubrication, para 1311.

END OF TASK

13-27