FRAME 2 - TM-9-2320-211-20-3-20035

TM 9-2320-211-20-3-2

FRAME 2

Using portable bearing lubricator and hand grease gun, grease outer bearing

cone (1).

Put outer bearing cone (1) in hub and drum assembly (2).

Using wheel bearing nut wrench, screw on adjusting nut (3).

Replace front wheel but do not jack down truck. Refer to TM 9-2320-211-10.

While turning wheel (4), using wheel bearing nut wrench, tighten adjusting

nut (3) until wheel binds.

Using wheel bearing nut wrench, back off adjusting nut (3) 1/8 turn.

Put one hand on bottom and one hand on top of wheel (4). Push with one hand

and pull with other hand.

NOTE

If bearings are adjusted correctly, there will be hardly

any play or wobble.

Put on washer (5) so that tab on washer fits in keyway in spindle (6).

Using wheel bearing nut wrench, screw on and tighten locknut (7).

TO FRAME 3

13-13