Pipe plug. - TM-9-2320-211-20-3-10864

TM 9-2320-211-20-3-1

(e) Pipe plug.

CAUTION

Fittings are made of soft brass and can be stripped

easily if tightened too much. Tighten fittings just

enough to stop air from leaking.

NOTE

The pipe plug on the air supply valve is used for

this typical task.

FRAME 1

Screw pipe plug (1) into valve (2).

Using 3/8-inch open end wrench, tighten pipe plug (1).

NOTE

Follow-on Maintenance Action Required:

1. Start engine and let it run until air pressure gage

reads between 65 and 120 psi. Refer to

TM 9-2320-211-10.

2. Stop engine. Refer to TM 9-2320-211-10.

3. Do air system leak test. Refer to para 1-5.

END OF TASK

12-132